Welding Data Loggers is the use of mechanical leveraged principles to save effortless welding welding machines of various workpieces. The large category belongs to the resistor welding machine. DN1S can overlap low -carbon steel plates, stainless steel plates, galvanized plate iron, punching parts, metal grids, and filters. It has the advantages of strong welding, fast speed, convenient operation, simple maintenance, and safety.

The structure of Welding Data Loggers is also simple and beautiful, mainly consisting of 6 parts

1. Box body: welded by corner steel frames and steel plates. The structure is firm and reliable. It can be opened on the left side of the left side of the box shell to facilitate maintenance.

2. Controller: Precisely control the welding current, with ultra -temperature alarm, error prompts, starting instructions, and welding instructions.

3. Welding transformer: The welded transformer is an iron shell type, the primary coil is formed by the copper wire bag, and the secondary coil is collected from multi -layer copper leather.

4. Electrical arm: The electrode arm is divided into two upper and lower two, which are connected to the secondary coil, and the lower electrode is insulated from the chassis. The electrode arm is equipped with an electrode head.

5. Mechanical transmission device: consisting of the head spring, leverage group, and foot of the foot. Adjust the distance between the itinerary and the lower rod to adjust the work pressure between the electrode.

6. Electrical control: There are controller, thyristor, and indicator lights. There is no mechanical contactor and longer life. No need to replace it.

welding data loggers https://www.dowelding.com/Welding-Data-Loggers.html